Product ID:TERRAZZO M UNDERLAY RESIN--COMP D
MSDS Date:12/15/1989
FSC:5610
NIIN:00N066423
MSDS Number: BZRXP

Emergency Phone: 213-636-0561

Info Phone: 213-636-0561

Cage: 88167

Telephone: 908-245-2800

Cage: 88167

EPOXY HARDENER; OR EPOXY RESIN CURING AGENT; (MODIFIED

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MINOR BURNING TO EYES, NOSE,
THROAT & SKIN. CHRONIC:DEFATTING TO SKIN - DIZZINESS & NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid:INHAL:MOVE SUBJECT TO FRESH AIR. EYES:FLUSH W/WATER FOR AT
LEAST 15 MINUTES - CALL MD. SKIN:WASH W/SOAP & WATER. INGEST:DO NOT
INDUCE VOMITING - CALL MD.

Flash Point Method:SCC
Flash Point:200F,93C
Extinguishing Media:CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:SPREAD ABSORBENT MATERIAL OVER SPILL & PLACE
IN CLOSED CONTAINER. REMOVE ALL SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL DRY AREA - PROTECTIVE
GLOVES SHOULD BE WORN AS MATERIAL IS SLIGHTLY CORROSIVE.
Other Precautions:AVOID INHALATION OF HEATED VAPORS & SPRAY MISTS.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR IF VENILATION IS
POOR.
Ventilation:GOOD VENTILATION. LOCAL EXHAUST &/OR MECHANICAL (GENERAL).
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . AS NEEDED TO PROTECT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT:& FULL LENGTH FACESHIELD .

Spec Gravity:1.01 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE STRAW LIQUID; MODERATE AMINE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS. AVOID CONTACT W/EPOXY RESINS IN
UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:HIGH TEMPERATURES. AVOID CONTACT W/EPOXY
RESINS UNTIL READY FOR APPLICATION.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE OF IN SANITARY LANDFILL ACCORDING TO
LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.